![[Company Logo Image]](images/tc%20dyn-qgengy-ellip-ellip2.jpg)
|
|
|
|
-= In Stock =- Click Here>> Dee Tee Enterprises- CA, USA -= Hi-S RC Lithium Polymer Battery Monitor =- Designed for Electric RC Aircraft: 6S, 7S, 8S, 9S Lipo packs
-==- Switch settings for 6S, 7S, 8S, 9S cell packs -==- -==- Great for RC Planes and Heli's -==- -==- Advanced 7 color Pulse Level Detection -==- Glitch Proof, All Analog Circuitry -==- -==- Battery Overload Condition Indication -==- -==- Ultra-Bright, Tri-LEDs, seen from Any Angle, Any Distance -==-
The Discharge Curve: LiPo's ARE NOT like other batteries. The voltage, while under load, is non-linear, and tends to fall off more rapidly as it nears the end of its charge cycle. Flying by ‘timing’ the flight can lead to battery damage. A Low Voltage Cut-off set point in the ESC can false trigger and is difficult to optimize. Don’t fly blind. Know exactly where you are in the Discharge Curve. 7 color modes include Blue/Cyan/- Good, Green/Yellow/Orange- Warn and Red for Low condition. The device also detects when the load pulse is too severe: a Magenta color indicates a possible Overload condition. Warn condition indicates approximately 80-85% discharge.
*Green= OK (load pulse voltage between Level 1 and Level 2)
Pulse Level Detection: Depending on the load, a LiPo battery pack voltage may pulse (PWM) as much as 15-25% below DC levels! The TC Dynamics LiPo Battery Monitor features a unique In-Flight representation of the changing Pulse Depth under various load/discharge conditions. The PLD feature can also indicate an OVERLOAD condition. Important: sustained voltage below 2.8v/cell may damage a LiPo pack.
-==-
Specs:
Input Max: +40v; Current Max: 50mA; Weight: .4 oz; Power
Leads Length: 10”; Board Size: .55” x 1.8”; Accuracy +/- 2%; 4kv Electro-Static
protection; Reverse Hook-up and Short-Circuit protected -==-
Click Here>> Dee Tee Enterprises- CA, USA
|
