Home
Testimonials
Heli-LED LiPo Monitor
Single-LED LiPo Monitor
Hi-S LiPo Batt Monitor
Tri-LED Batt Monitor
Future Development
Contact

-= Distributor has Stock, Order Now !!!!!!=-

-= Heli-LED RC Lithium Polymer Battery Charge Monitor =-

Specially Designed for all Electric RC Helicopters: 3S, 4S, 5S, 6S

  -==- Ultra Bright, Wide Angle RGB LED -==-

-==- Advanced 7 color Pulse Level Detection -==-

-==-Glitch Proof, All Analog Circuitry -==-

-==- Battery Overload Condition Indication -==-

-==- Switch settings for 3S, 4S, 5S, 6S cell packs -==-

The Discharge Curve: LiPo's ARE NOT like other batteries. The voltage, while under load, is non-linear, and tends to fall off more rapidly as it nears the end of its charge cycle. Flying by ‘timing’ the flight can lead to battery damage. A Low Voltage Cut-off set point in the ESC can false trigger and is difficult to optimize. Don’t fly blind. Know exactly where you are in the Discharge Curve. 7 color modes include Blue/Cyan/- Good, Green/Yellow/Orange- Warn and Red for Low condition. The device also detects when the load pulse is too severe: a Magenta color indicates a possible Overload condition. Warn condition indicates approximately 80-85% discharge.

                                                               ` *Green= OK (load pulse voltage between Level 1 and Level 2)

Pulse Level Detection: Depending on the load, a LiPo battery pack voltage may pulse (PWM) as much as 15-25% below DC levels! The TC Dynamics LiPo Battery Monitor features a unique In-Flight representation of the changing Pulse Depth under various load/discharge conditions. The PLD feature can also indicate an OVERLOAD condition. Important: sustained voltage below 2.8v/cell may damage a LiPo pack.  

-==- Specs: Input Max: +30v; Current Drain Max: 45mA; Weight: .2 oz; LED Cable Length: 5”; Power Leads Length: 10”; Board Size: .4” x .6”; Accuracy +/- 1%; 4kv Electro-Static protection; Reverse Hook-up and Short-Circuit protected -==-

Copyright © 2005 TC Dynamics
Last modified: 08/05/08